Product
Pay-OFF
Boiler Water Treatment (BWT)
Description
- Multifunction chemicals for controling corrosion, scale, disperses iron and other foulants.
- Online Descaler effective in removing, dispersing silica and sulfate scale
- without shutting down boiler
operation.
Features
- Contains a scale inhibitor, which minimizes the scale formation.
- A polyelectrolyte suspends any insoluble formation on the
bottom of the boiler. Suspended solids will leave the boiler with the blowdown. - An anti-corrosion agent forms a protective film on clean pipes,
thus preventing further corrosion. - A carbon dioxide scavenger minimizes corrosion in steam pipes.
Applications
Organic scale and corrosion inhibitor with dispersing properties for hard water. Soft descaler effectively in removing silica scale in operating boiler systems.
Cautions
- Very important to maintain boiler water pH in the range of 10.5-11.5.
- Be sure to have sufficient blowdown which control both the pH and
suspended matter in boiler.
Pay-OFF
Cooling Water Treatment (CWT)
Description
- Multiple effect combination product which prevent scale, inhibits corrosion, combats biological growth, suspend sludge and sediments.
Features
- Contains a scale inhibitor, which minimizes the scale formation.
- Contains corrosion inhibitors that will prevent rust.
- Non-flammable
Applications
Organic scale and corrosion inhibitor with dispersing properties for hard water. Soft descaler effectively in removing carbonate scale in operating cooling systems.
Cautions
Regular bleed-off at certain intervals is necessary to prevent an over accumulation of sludge which is caused by suspended dust and precipitated salts
Pay-OFF
Biological Treatment
Description
- Multiple effect combination product which prevent scale, inhibits corrosion, combats biological growth, suspend sludge and sediments.
Features
- Contains a scale inhibitor, which minimizes the scale formation.
- Contains corrosion inhibitors that will prevent rust.
- Non-flammable
Applications
Organic scale and corrosion inhibitor with dispersing properties for hard water. Soft descaler effectively in removing carbonate scale in operating cooling systems.
Cautions
Regular bleed-off at certain intervals is necessary to prevent an over accumulation of sludge which is caused by suspended dust and precipitated salts
Pay-OFF
Reverse Osmosis Chemicals (AERO)
Description
- AERO series chemical have been developed as a broad spectrum liquid antiscalant, an inorganic scale cleaner and iron deposit remover, as a general purpose membrane cleaner effective against organic based foulants for use in reverse osmosis and ultra filtration membrane systems.
- Pay off AERO series chemicals are certified NSF/ANSI Standard 60-Drinking Water Treatment Chemicals.
Features
- High performance and low operating costs.
- Low environmental impact. Improve operational efficiency.
- Reduce scaling and corrosion risks
Applications
Reverse osmosis membrane cleaner for removing fouling caused by organic, biological, colloidal foulants, iron salts, oxides and hydroxides. It can also be used to remove light calcium carbonate scaling.
Cautions
Cleaning should be undertaken whenever the permeate flux reduces by 10- 15% or, either the normalised differential pressure or permeate conductivity increase by 10-15%. In many instances it is best to adopt a programme of regular preventive cleaning.
Pay-OFF
Reverse Osmosis Equipment
Description
- Our Reverse Osmosis are engineered to economically produce high purity water by removal of dissolved minerals, bacteria, particles, and organic impurities. Each Pay-Off RO machine is constructed using the highest quality components and materials for reliable operation and exceptional performance.
Features
- Low prices.
- Using the most advanced reverse osmosis membranes
- High efficiency
Applications
Produce high quality water for domestic, commercial & industrial apllications.
Cautions
The membranes show very little fouling when the feed water has a turbidity of < 1 NTU. The membranes show very low fouling at a feed SDI of less than 5. An SDI of less than 5 is considered acceptable for the reverse osmosis systems.
Pay-OFF
PR-333
Description
- Pay Off PR-333 adalah larutan pengelupas cat yang efektif untuk merontokkan cat, varnish, dempul, epoxy,dan lacquer.
- Pay Off PR-333 dapat merontokkan cat dengan cepat dan praktis pada beberapa media seperti besi, kayu, dan acrylic.
Spesifikasi
- Fisik : Cairan gel sedikit keruh
- Berat Jenis : 1,25 +0,1gr/cc
Pay-OFF
PR-423
Description
- Pay Off PR-423 is solvent based paint stripper, fast-acting and efficiently will remove paint from metal surfaces. Effective on acrylics, lacquers, epoxy, and polyurethane.
- Non-corrosive to all common metals under normal exposure time
Spesifikasi
- Appearance : white gel liquid
- Specific Gravity : 1,24 +0,1 gr/cc
Applications
Apply on the surface and let the stripper stand until paint completely blistered or liquefied. Multiple coats may require repeat application
Advantages
- Removes paint, acrylic, lacquer, epoxy, and polyurethane
- Works on vertical surfaces
Pay-OFF
PR-423
Composition
- Ethoxylate
Appearance
- Liquide
Colour
- clear
Typical Properties
- Active ingredients : approx. 100 %
- Consistency : low viscosity
- Density at 30°C : 1,0 ± 0,1 gr/cc
- Solubility in water : emulsifiable
This information is intended as a guideline only and should not be used to issue specifications. Slight
deviations do not affect application and capability of the product
Properties/applications
Main applications
– defoamer for alkaline systems
– defoamer for waste and water treatment system
– defoamer for fiber cement processes
Recommended levels/use
Added sump side, typically 50 cc or more Pay-Off Defoamer 1312 for each 1 m3 of fluid is all that is necessary minimize foaming. Add directly to system in area where foam has become a problem.
Recommended levels/use
Added sump side, typically 50 cc or more Pay-Off Defoamer 1312 for each 1 m3 of fluid is all that is necessary minimize foaming. Add directly to system in area where foam has become a problem.
Packaging
30 liter jerrycan
Pay-OFF
RC 100
Description And Use
- RC-100 is an amber liquid containing mixture of hydrocarbon solvents, surfactants. It contains no cresylic or phenolic materials. RC-100 is specially designed for the removing and loosening of rubber deposits from asphalt concrete and Portland cement concrete airfield pavements
General Specification
- Appearance : Blackish brown liquid
- Specific grafity : 0.99 gr/ml + 0.02 Application : Brush, roller, and spray
- application is recommended.
Instructions And Dosage Requirements
For application on rubber deposit removal, RC-100 should be diluted 1 part of compound to 2 parts water. Apply diluted mixture via applicator equipment to runway touchdown area.
The solution should stand on the rubber deposit for approximately 15-20 minutes on asphalt. Brush with power rotary type brusher than flash with high pressure water rinse
Product benefits
- Economical – used diluted with water
- Free rinsing – leaves no oily residue
Packaging
RC-100 is available in 30 liter per pail
KATFLOC
Bacteri for Aerob And Anaerob Process
Description
- Katfloc SC – Series is a cationic, relatively low molecular weight type polymer supplied in easy-to-use liquid form. It is used as a coagulant and/or coagulant – aid in the clarification treatment of water it can partially to totally replace conventional inorganic metal salts (e.g aluminum or iron salts). And also used for dewatering agent
Applications
- Katfloc SC – Series must be diluted with clean water least 1: 10 prior to dosing. Dosing point should be thus selected as to provide for turbulent, prolonged mixing with the water to be treated in order to optimize performance. If used in conjunction with in organic coagulant, the inorganic is usually added first but in many cases, the product can be dosed at the same point. Katfloc SC-Series may also be pre-mixed with inorganic coagulant. In cases where a secondary coagulant/flucolant is used, Katfloc SC – Series should be dosed first
Features
- Product : Bacteri SC-Series (585 powder)
Function : Bacteri Aerob Proses - Product : Bacteri SC – Series (660/668 Liquid)
Function : BacteriAnaerob Proses
Cautions
Katfloc SC-Series is non-toxic and approved by the US NSF and other official institutions for use in the treatment of potable water. The product should be stored in a cool dry place. Spillage should be avoided, as spilled polymer is slippery. Wash spillage with plenty of water. The used of protective splash goggles and glove is recommended when handling the product
KATFLOC
Decolorizing as Color Removing
Description
- Decolorizing is a synthetic cationic polymer that can partially or totally replace inorganic and organic coagulant in the clarification treatment of industrial effluents containing super-colloidal suspensions such as color. Decolorizing is particularly affective as a decolorization agent for industrial effluents containing residual nature or synthetic dyes such as textile industry waste water.
Applications
- Decolorizing should preferably be dissolved in water to a 1,5 % strength solution prior to dosing. The dosing point should be selected such that intimate mixing and sufficient contact time with the substrate can occur.
Decolorizing not normally used in conjunction with inorganic coagulant such as aluminum or iron salts. It is normally dosed before inorganic coagulant addition. N.B. Overdosing of Decolorizing should be avoided as re-dispersion can occur. The use of a high molecular weight anionic flocculant after Decolorizing addition is recommended as it results in an increased floc size.
Dosage of Decolorizing varies depending on the composition of the effluent being treated and the amount of inorganic coagulant being used. Typical dosage rates range from 10 – 100 ppm
Features
- Product : DCR 100 R
Function : Color removing for textile or paper industry
Cautions
It is essentially non-toxic. Store in a cool dry place. Polymer is slippery, if spilled, clean up immediately using an inert granular substance i.e, sawdust, and,etc
KATFLOC
Flocculant as Clarification Proses (Cationic)
Description
- Polymer Cationic flocculant is a high molecular weight, medium cationic change polyacrylamide
Applications
- Polymer Cationic is mostly used for dewatering of digest sludge and the flotation of the sludge.
Features
- Flocculant are hygroscopic.
- White free flowing granular powder.
- Product : C 9000 Series (9020/9060)
Function : As Dewatering Sludge
Cautions
Store in dry at a temperature below 35°C. Do not store outside spillage should be cleaned up rapidly,surface become very slippery. Hazardous if flocculant are spread on the floor.
KATFLOC
Flocculant as Clarification Proses (Anionic)
Description
- Polymer Anionic flocculant is a high molecular weight, very low anionic polyacrylamides supplied in powder form.
Applications
- Polymer Anionic used in conjunction with a primary coagulant, both of organic (eg Alum, Ferry, PAC) and organic in the treatment of raw water potable usage.
Features
- Flocculant are hygroscopic.
- White free flowing granular powder
- Product : AP 300 series (310,315,320,325
Function : Flocculant Agent (polymer anionic)
Cautions
Store in dry at a temperature below 35°C. Do not store outside spillage should be cleaned up rapidly,surface become very slippery.
KATFLOC
Nutribac as Nutrients for Biological Treatment
Description
- Nutribac as bacterial nutrients in the wastewater treatment process biologist with the aerobic process, Nutribac is made from the organic material formulation and an organic material as other ingredients.
Applications
- Nutribac used in sewage treatment industry (liquid) with aerobic biological processes as a bacterial nutrient, in the use and additions could be done with the injection manually in aeration tanks and the like, can be used for the treatment of wastewater with COD> 2000 ppm.
Features
- Reduce COD and BOD values by more than 90% To add and bacterial growth in the mouth at the wastewater treatment biological processes which are also present in activated sludge. improve the quality of activated sludge.
- Product : Nutribac 1000 series (1120/1020/1050)
Function : Nutrition bacteria in biological
processes with system areasi
Cautions
Store in dry at a temperature below 35°C. Do not store outside spillage should be cleaned up rapidly,surface become very slippery.
KATFLOC
Coagulant as Clarification Proses
Description
- The P/PL/SC-Series coagulant are blends of inorganic and organic coagulant, to be used for the clarification of river water and waste water treatment. Theyare highly cationically changer
Applications
- Coagulant is recommended to feed as solution from dilution, intro pod or sump where good distribution and mixing can be assured.
Features
- Easy of handling
- ower use of coagulant compared using only inorganic coagulants
- The precipitate produced are more dense, meaning a lower volume of
sludgeand thus lowering the for transportation of the discarded
sludge - Product : P-Series (PAC Liquid/P 108/P 110/P112)
Function :Coagulant - Product : PL-Series (PLC 50/PL 50/P21 S/ P10 s)
Function :Organic coagulant for reducing an - Product : SC-Series (200/500/203/510 A/570 PD)
Function :organic coagulant consumption
Cautions
Depend on the extent of the impurities in the water to be treated. Adilution to a 5% solution prior to dosing is preferable
